About This

• 【Check AHD Compatibility Before Purchase】— This reverse camera outputs AHD 720P/1080P at 25fps. Please confirm that your screen or head unit supports AHD signal input at these formats before ordering. Note: If your Android units only support NTSC format, please don't buy our backup camera. After installation, don’t forget to set the correct video signal format to activate the camera display.
• Dual Resolution Modes – 720P & 1080P】— Default resolution is 1280x720P @ 25fps (white line uncut). Cut the white line to switch to 1920x1080P @ 25fps for higher clarity. ⚠️ Important: Some monitors or Android head units do not support AHD 1080P. If unsure, do not cut the white line to avoid compatibility issues.
• 【Reversing Guide Line Rearview Camera with Switcher Cables】 It generates AHD-720P-25fps video signal and reversing guide line by default. Cut the white wire to make the camera generate AHD-1080P-25fps video signal. Cut the green wire to turn off the guide line. NOTE: Please disconnect and then reconnect the camera power cable after cutting any wire to activate it.
• 【Auto White Balance & Color Correction】The truck backup camera support auto white balance and color correction tech. Night vision is very good and the video quality is perfect. Car backup cameras have high-definition sensors, providing clear and true color reproduction to the driver day or night. You can install it with your touch screen stereo and it will work perfectly!
• 【170 Degree Wide Viewing Angle】The wider the field of vision, the smaller the blind spots. The backup camera for truck picks up the slack with a wide 170-degree view field, eliminating blind spots once and for all. A 45-degree adjustment angle adds increased visibility, allowing you to adjust the rear camera to a position that's best for you.
• 【Amazing IP69 Waterproof】This rv backup camera with IP69 waterproof IP rate. It is designed with a fully sealed glue-filling craft, so you absolutely do not need to worry about water, fog, rain, or mist. you can also wash your awesome car in a high-pressure washer or in an automated car wash.
• 【Installation is easy】To install a car reverse camera on the back of your bumper or on the tailgate handle. you need to remove the little bracket and turn it (designed to do this). Well-designed adjustable mechanism. You can adjust the angle up and down through the metal bracket. Very easy to install.

Overview

• Brand : ViaBecs
• Compatible Devices : AHD 1080P/25fps Monitor, AHD 720P/25fps Monitor
• Installation Type : Surface Mount
• Voltage : 12 Volts
• Optical Sensor Technology : CCD CMOS
• Lens Type : Wide Angle
• Real Angle of View : 170 Degrees
• Connector Type : RCA
• Optical Sensor Size : 1/2.5 inch
• Field Of View : 170 Degrees