About This

• ▶Flexible Vehicle Compatibility: This backup camera has a voltage range of 9-35V DC power supply with a U-shaped metal bracket and is suitable for a variety of large vehicles, such as buses, box trucks, pickup trucks, garbage trucks, flatbed trucks, dump trucks, street sweeper trucks, refrigerator trucks, motor homes, vans, skid steers, farm tractors, combines, cotton pickers, crop sprayers, bulldozers, snow plows, forklifts, excavators, heavy equipment, etc.
• ▶2 Split Screen: This backup camera for truck comes with a 9-inch display, HD 1080P images, dual-channel display, you can choose a single view or choose 2 Split Screen, if you choose to use a single view, 9-inch large screen can give you a better experience, you can also choose to add a second camera for 2 Split Screen multi-view to observe the environment around your vehicle, the 2 Split Screen can give you a greater range of vision.
• ▶IP69K Waterproof and Night Vision: This backup camera with monitor comes with HD 1080P image function and transmits the signal through the cable, which makes the signal transmission more stable without delay, 20G vibration-proof, and IP69K (the highest level) waterproof night vision function (the cable interface also has a waterproof cover), which enables you to have a normal image in any harsh environment, providing better protection for your driving safety, and the 20G vibration-proof allows
• ▶Image Flip and Guidelines: The backup camera for truck. rv can be installed in two ways, the monitor can be mounted on the dashboard or the roof of the car, no matter which way you choose to install it, by setting up the mirror flip, the display can present the correct image perspective, the parking guide line so that you don't need to worry about the parking problem anymore, this camera is the second pair of "eyes" for your parking, which can help you to park safely and correctly.
• ▶Easy Installation: This reverse camera uses a waterproof aviation 4-pin screw connector, no BNC/RCA, this wired backup camera is easy to install, connect the red wire to ACC/battery (+), the black wire to metal/ground, connect the 4-pin connector to the camera to complete the installation. If you have a trailer, you can lay down an extra extension cable to disconnect the connector when you don't need the trailer and connect the cable when you need to use the trailer. No rewiring is required.
• Note: This is a wired connection system!

Overview

• Brand : VEKOOTO
• Screen Size : 9 Inches
• Product Dimensions : 9.05"L x 2.56"W x 6.1"H
• Compatible Devices : Monitor
• Installation Type : Surface Mount, Roof Mount
• Voltage : 12 Volts
• Optical Sensor Technology : CMOS
• Lens Type : Wide Angle
• Real Angle of View : 120 Degrees
• Connector Type : 4-pin screw connector